| Introduction | Dimensions | Hydraulics | Production | Excavator | Applications |


MB-R900 twin-header is suitable for 19~35 ton hydraulic excavators.
MB-R900 twin-header

MB-R900 twin-header


MB-R900 twin-header weights 1400 kg.

MB-R900 twin-header

MB-R900 Twin Header Dimensions

Drum diameter (A) (mm)600
Width (B) (mm)800
Height (C) (mm)1375
Lenght (D) (mm)1130
Weight (kg)1400

Hydraulic requirements
MB-R900 hydraulic requirements

Only three hoses are necessary to operate the MB-R900, IN, OUT and DRAIN.

The reccomanded excavator for the MB-R900 should be equipped with hydraulic system with simple effect.

The required flow for the MB-R900 is 250~350 l/min at 350 bar. Our tecnichians can verify the right values of flow and pressure available at your excavator with precise instrumentation (flowmeter).

Flow (l/min)250~350
Pressure (bar)350

MB-R900 production capacity

MB-R900 Drum Cutter is used for milling of floors and asphalts.

MB-R900 excavator

To operate the MB-R900 the excavator must have have hydraulic system with specifications set forth below, and enough lifting capacity and weigth to be stable during loading, processing and unloading phase. The recommended excavator weight is between 19~35 ton.

Please check the user manual of the excavator for the weight and lifting capacity, in case MB Technical Staff is happy to help you in finding out the relevant data for your excavator.

MB has successfully installed and operated the MB-R900 on all main excavator's brands.


MB-R900 twin-header has been succesfully used in applications for demolition works, road construction, recycling, excavations, mines.


Contact us

Contact us by clicking on the image on the side for any information regarding the product, its applications, use and possible savings in adopting the MB technology. We sometimes have second hand buckets available to sell. Feel free to contact us if you are interested in a quote, a demonstration or need any service assistance. We will be very happy to help you.