MB-R500 twin-header is suitable for 3.5~11 ton hydraulic excavators. Dimensions
MB-R500 twin-header weights 300 kg.
Drum diameter (A) (mm)
Width (B) (mm)
Height (C) (mm)
Lenght (D) (mm)
Only three hoses are necessary to operate the MB-R500, IN, OUT and DRAIN.
The reccomanded excavator for the MB-R500 should be equipped with hydraulic system with simple effect.
The required flow for the MB-R500 is 60~120 l/min at 360 bar.
Our tecnichians can verify the right values of flow and pressure available at your excavator with precise
MB-R500 Drum Cutter is used for milling of floors and asphalts.
To operate the MB-R500 the excavator must have have hydraulic system with specifications set forth below, and
enough lifting capacity and weigth to be stable during loading, processing and unloading phase. The recommended
excavator weight is between 3.5~11 ton.
Please check the user manual of the excavator for the weight and lifting capacity, in case MB Technical Staff is
happy to help you in finding out the relevant data for your excavator.
MB has successfully installed and operated the MB-R500 on all main excavator's brands.
MB-R500 twin-header has been succesfully used in applications for demolition works, road construction, recycling,
Contact us by clicking on the image on the side for any information regarding the product, its applications, use and possible savings in adopting the MB technology. We sometimes have second hand buckets available to sell. Feel free to contact us if you are interested in a quote, a demonstration or need any service assistance. We will be very happy to help you.