| Introduction | Dimensions | Hydraulics | Production | Excavator | Applications |

MB-S14 S4

MB-S14 S4 screener bucket screener bucket by MB for ton hydraulic excavators. To separate, screen, sieve material at your jobsite construction demolition.
MB-S14 S4 bucket crusher

MB-S14 S4 screener bucket


MB-S14 S4 screener bucket has a total dimension of 1700 x 1400 x 1440 mm and weights 780 Kg without upper plate and coupler. The bucket is perfectly balanced and can work easily with arm of excavator full extended.

MB-S14 S4 バケットクラッシャー

MB-S14 S4 バケットクラッシャー

DescriptionMB-S14 S4
Lenght (mm)1700
Width (mm)1400
Height (mm)1440
Weight (kg)780

Hydraulic requirements
MB-S14 S4 hydraulic requirements

Only three hoses are necessary to operate the MB-S14 S4, IN, OUT and DRAIN.

Under specific conditions the bucket can be adapted to work also only with two hoses, without drainage. In this case the excavator maximum back-pressure at any time in the system must be lower than 10 bar.

The reccomanded excavator for the MB-S14 S4 should be equipped with hydraulic system with simple effect.

The required flow for the MB-S14 S4 is 60 l/min at 150 bar. Our tecnichians can verify the right values of flow and pressure available at your excavator with precise instrumentation (flowmeter).

DescriptionMB-S14 S4
Flow (l/min)60
Pressure (bar)150

MB-S14 S4 MB-S14 S4 production capacity

MB-S14 S4 バケットクラッシャー

The MB-S14 S4 can sieve several material, including concrete, natural stones, bricks, glass.

Production heavily depends on material's humidity, consistence, size of mesh, input size of material. Please contact us for more information about production.

The sieve has a diameter of 1200 mm, and an internal volume of 1.1 ㎥. For maximum performaces we suggest to load the sieve at a maximum of 0.46 ㎥.

The sieve rotates at a speed of 15~25 rpm, allowing for a smooth and complete separation of material. A faster speed would be in fact ineffective, limiting the total throughput of the screener.

Depending on the models of screener bucket, MB can supply several sieve sizes, in general from 10 to 100 mm, depending on specific requests. Sieve is cutted with laser and the shape of holes is round, for the 10 mm, and squared for higher sieving sizes.

The sieve is made of Hardox for sieve having hole sizes bigger than 40mm. It is made of iron for sieves having hole sizes between 10 and 40mm.

MB-S14 S4 excavator

To operate the MB-S14 S4 the excavator must have have hydraulic system with specifications set forth below, and enough lifting capacity and weigth to be stable during loading, processing and unloading phase. The recommended excavator weight is between 9~20 ton.

Please check the user manual of the excavator for the weight and lifting capacity, in case MB Technical Staff is happy to help you in finding out the relevant data for your excavator.

MB has successfully installed and operated the MB-S14 S4 on all main excavator's brands.


MB-S14 S4 screener bucket has been succesfully used in applications for demolition works, road construction, recycling, excavations, mines.


Contact us

Contact us by clicking on the image on the side for any information regarding the product, its applications, use and possible savings in adopting the MB technology. We sometimes have second hand buckets available to sell. Feel free to contact us if you are interested in a quote, a demonstration or need any service assistance. We will be very happy to help you.