MB-G600 S2 recycling and sorting grapple suitable for 6~12 ton hydraulic excavators.
To move any material at your jobsite construction demolition. Dimensions
MB-G600 S2 grapple weights 600 Kg without upper plate and coupler.
Only three hoses are necessary to operate the MB-G600 S2, IN, OUT and DRAIN.
Under specific conditions the bucket can be adapted to work also only with two hoses, without drainage.
In this case the excavator maximum back-pressure at any time in the system must be lower than 10 bar.
The reccomanded excavator for the MB-G600 S2 should be equipped with hydraulic system with simple effect.
The required flow for the MB-G600 S2 is 25 l/min at 300~320 bar.
Our tecnichians can verify the right values of flow and pressure available at your excavator with precise
To operate the MB-G600 S2 the excavator must have have hydraulic system with specifications set forth below, and
enough lifting capacity and weigth to be stable during loading, processing and unloading phase. The recommended
excavator weight is between 6~12 ton.
Please check the user manual of the excavator for the weight and lifting capacity, in case MB Technical Staff is
happy to help you in finding out the relevant data for your excavator.
MB has successfully installed and operated the MB-G600 S2 on all main excavator's brands.
MB-G600 S2 sorting grapple has been succesfully used in applications for demolition works, road
construction, recycling, excavations, mines.
Contact us by clicking on the image on the side for any information regarding the product, its applications, use and possible savings in adopting the MB technology. We sometimes have second hand buckets available to sell. Feel free to contact us if you are interested in a quote, a demonstration or need any service assistance. We will be very happy to help you.