| Introduction | Dimensions | Hydraulics | Production | Excavator | Applications |

MB-G1200 S2

MB-G1200 S2 recycling and sorting grapple suitable for 18~25 ton hydraulic excavators. To move any material at your jobsite construction demolition.
MB-G1200 S2 sorting grapple

MB-G1200 S2 sorting grapple


MB-G1200 S2 grapple weights 1600 Kg without upper plate and coupler.

MB-G1200 S2 coupler
DescriptionMB-G1200 S2
A (mm)2115
B (mm)1420
C (mm)590
D (mm)1640
E (mm)1185
F (mm)810
L (mm)1235
Weight (kg)1600

Hydraulic requirements
MB-G1200 S2 hydraulic requirements

Only three hoses are necessary to operate the MB-G1200 S2, IN, OUT and DRAIN.

Under specific conditions the bucket can be adapted to work also only with two hoses, without drainage. In this case the excavator maximum back-pressure at any time in the system must be lower than 10 bar.

The reccomanded excavator for the MB-G1200 S2 should be equipped with hydraulic system with simple effect.

The required flow for the MB-G1200 S2 is 50 l/min at 320~350 bar. Our tecnichians can verify the right values of flow and pressure available at your excavator with precise instrumentation (flowmeter).

DescriptionMB-G1200 S2
Flow (l/min)50
Pressure (bar)320~350

MB-G1200 S2 MB-G1200 S2 production capacity

MB-G1200 S2 sorting grapple

MB-G1200 S2 excavator

To operate the MB-G1200 S2 the excavator must have have hydraulic system with specifications set forth below, and enough lifting capacity and weigth to be stable during loading, processing and unloading phase. The recommended excavator weight is between 18~25 ton.

Please check the user manual of the excavator for the weight and lifting capacity, in case MB Technical Staff is happy to help you in finding out the relevant data for your excavator.

MB has successfully installed and operated the MB-G1200 S2 on all main excavator's brands.


MB-G1200 S2 sorting grapple has been succesfully used in applications for demolition works, road construction, recycling, excavations, mines.


Contact us

Contact us by clicking on the image on the side for any information regarding the product, its applications, use and possible savings in adopting the MB technology. We sometimes have second hand buckets available to sell. Feel free to contact us if you are interested in a quote, a demonstration or need any service assistance. We will be very happy to help you.