| Introduction | Dimensions | Hydraulics | Production | Excavator | Applications |

BF80.3 S4

BF80.3 S4 crusher bucket by MB for 22~28 hydraulic excavators. Suitable for demolition, road construction, reciclying, land reclamation.
BF80.3 S4 crusher bucket

BF80.3 S4 crusher bucket

Dimensions

BF80.3 S4 crusher bucket has a total dimension of 1970 x 1330 x 1325 mm and weights 3000 Kg without upper plate and coupler. The front aperture of jaw is 900 x 450 mm, and the output can be regulated by means of shims between 20~120 mm.

The bucket has a loading capacity of 0.7 m3.


BF80.3 S4 バケットクラッシャー

BF80.3 S4 バケットクラッシャー

DescriptionBF80.3 S4
Lenght (mm)1970
Width (mm)1330
Height (mm)1325
Weight (kg)3000
Aperture width (mm)900
Aperture height (mm)450
Loading capacity (㎥)0.7

Hydraulic requirements
BF80.3 S4 hydraulic requirements

Only three hoses are necessary to operate the BF80.3 S4, IN, OUT and DRAIN.

Under specific conditions the bucket can be adapted to work also only with two hoses, without drainage. In this case the excavator maximum back-pressure at any time in the system must be lower than 10 bar.

The reccomanded excavator for the BF80.3 S4 should be equipped with hydraulic system with simple effect.

The required flow for the BF80.3 S4 is 150 l/min at 215 bar. Our tecnichians can verify the right values of flow and pressure available at your excavator with precise instrumentation (flowmeter).

DescriptionBF80.3 S4
Flow (l/min)150
Pressure (bar)215

Production
BF80.3 S4 BF80.3 S4 production capacity

BF80.3 S4 バケットクラッシャー

The BF80.3 S4 can reduce concrete, natural stones, bricks, glass etc., to a size between 20~120 mm.

It can produce up to 34 ㎥/h which means about 51 ton/h if we consider concrete with an average specific weight of 1.5 ton/㎥.

The real throughtput can vary depending on the input and output size of material, its humidity, the presence of soil, etc.

The best way to obtain a high throughtput (production per hour) and a low wear of parts and jaws is to sieve the material before size reduction process. In fact, demolition material contains a lot of sand, soil and dust, that doesn't need to be reduced.

Please refer to our Screener line-up for this scope.

DescriptionBF80.3 S4
ModelBF80.3 S4
Max production (m3/h)34
Max production (ton/h)51

Excavator
BF80.3 S4 excavator

To operate the BF80.3 S4 the excavator must have have hydraulic system with specifications set forth below, and enough lifting capacity and weigth to be stable during loading, processing and unloading phase. The recommended excavator weight is between 22~28 ton.

Please check the user manual of the excavator for the weight and lifting capacity, in case MB Technical Staff is happy to help you in finding out the relevant data for your excavator.

MB has successfully installed and operated the BF80.3 S4 on all main excavator's brands.


Applications

BF80.3 S4 crusher bucket has been succesfully used in applications for demolition works, road construction, recycling, excavations, mines.


MB

Contact us

Contact us by clicking on the image on the side for any information regarding the product, its applications, use and possible savings in adopting the MB technology. We sometimes have second hand buckets available to sell. Feel free to contact us if you are interested in a quote, a demonstration or need any service assistance. We will be very happy to help you.