BF60.1 S4 crusher bucket by MB for 10~18 hydraulic excavators. Suitable for demolition, road construction, reciclying, land reclamation. Dimensions
BF60.1 S4 crusher bucket has a total dimension of 1745 x 1000 x 1100 mm and weights
1650 Kg without upper plate and coupler.
The front aperture of jaw is 600 x 438 mm, and the output can be regulated
by means of shims between 20~100 mm.
The bucket has a loading capacity of 0.45 m3.
Aperture width (mm)
Aperture height (mm)
Loading capacity (㎥)
Only three hoses are necessary to operate the BF60.1 S4, IN, OUT and DRAIN.
Under specific conditions the bucket can be adapted to work also only with two hoses, without drainage.
In this case the excavator maximum back-pressure at any time in the system must be lower than 10 bar.
The reccomanded excavator for the BF60.1 S4 should be equipped with hydraulic system with simple effect.
The required flow for the BF60.1 S4 is 120 l/min at 230 bar.
Our tecnichians can verify the right values of flow and pressure available at your excavator with precise
The BF60.1 S4 can reduce concrete, natural stones, bricks, glass etc., to a size between 20~100
It can produce up to 19 ㎥/h which means about 28 ton/h if we consider
with an average specific weight of 1.5 ton/㎥.
The real throughtput can vary depending on the input and output size of material, its humidity, the presence of
The best way to obtain a high throughtput (production per hour) and a low wear of parts and jaws is to sieve the
material before size reduction process.
In fact, demolition material contains a lot of sand, soil and dust, that doesn't need to be reduced.
Please refer to our Screener line-up for this scope.
Max production (m3/h)
Max production (ton/h)
To operate the BF60.1 S4 the excavator must have have hydraulic system with specifications set forth below, and
enough lifting capacity and weigth to be stable during loading, processing and unloading phase. The recommended
excavator weight is between 10~18 ton.
Please check the user manual of the excavator for the weight and lifting capacity, in case MB Technical Staff is
happy to help you in finding out the relevant data for your excavator.
MB has successfully installed and operated the BF60.1 S4 on all main excavator's brands.
BF60.1 S4 crusher bucket has been succesfully used in applications for demolition works, road construction,
recycling, excavations, mines.
Contact us by clicking on the image on the side for any information regarding the product, its applications, use and possible savings in adopting the MB technology. We sometimes have second hand buckets available to sell. Feel free to contact us if you are interested in a quote, a demonstration or need any service assistance. We will be very happy to help you.