| Introduction | Dimensions | Hydraulics | Production | Excavator | Applications |

BF135.8

BF135.8 crusher bucket by MB for 45+ hydraulic excavators. Suitable for demolition, road construction, reciclying, land reclamation.
BF135.8 crusher bucket

BF135.8 crusher bucket

Dimensions

BF135.8 crusher bucket has a total dimension of 2930 x 1880 x 1700 mm and weights 7500 Kg without upper plate and coupler. The front aperture of jaw is 1300 x 600 mm, and the output can be regulated by means of shims between 40~150 mm.

The bucket has a loading capacity of 1.6 m3.


BF135.8 バケットクラッシャー

BF135.8 バケットクラッシャー

DescriptionBF135.8
Lenght (mm)2930
Width (mm)1880
Height (mm)1700
Weight (kg)7500
Aperture width (mm)1300
Aperture height (mm)600
Loading capacity (㎥)1.6

Hydraulic requirements
BF135.8 hydraulic requirements

Only three hoses are necessary to operate the BF135.8, IN, OUT and DRAIN.

Under specific conditions the bucket can be adapted to work also only with two hoses, without drainage. In this case the excavator maximum back-pressure at any time in the system must be lower than 10 bar.

The reccomanded excavator for the BF135.8 should be equipped with hydraulic system with simple effect.

The required flow for the BF135.8 is 320 l/min at 250 bar. Our tecnichians can verify the right values of flow and pressure available at your excavator with precise instrumentation (flowmeter).

DescriptionBF135.8
Flow (l/min)320
Pressure (bar)250

Production
BF135.8 BF135.8 production capacity

BF135.8 バケットクラッシャー

The BF135.8 can reduce concrete, natural stones, bricks, glass etc., to a size between 40~150 mm.

It can produce up to 75 ㎥/h which means about 112 ton/h if we consider concrete with an average specific weight of 1.5 ton/㎥.

The real throughtput can vary depending on the input and output size of material, its humidity, the presence of soil, etc.

The best way to obtain a high throughtput (production per hour) and a low wear of parts and jaws is to sieve the material before size reduction process. In fact, demolition material contains a lot of sand, soil and dust, that doesn't need to be reduced.

Please refer to our Screener line-up for this scope.

DescriptionBF135.8
ModelBF135.8
Max production (m3/h)75
Max production (ton/h)112

Excavator
BF135.8 excavator

To operate the BF135.8 the excavator must have have hydraulic system with specifications set forth below, and enough lifting capacity and weigth to be stable during loading, processing and unloading phase. The recommended excavator weight is between 45+ ton.

Please check the user manual of the excavator for the weight and lifting capacity, in case MB Technical Staff is happy to help you in finding out the relevant data for your excavator.

MB has successfully installed and operated the BF135.8 on all main excavator's brands.


Applications

BF135.8 crusher bucket has been succesfully used in applications for demolition works, road construction, recycling, excavations, mines.


MB

Contact us

Contact us by clicking on the image on the side for any information regarding the product, its applications, use and possible savings in adopting the MB technology. We sometimes have second hand buckets available to sell. Feel free to contact us if you are interested in a quote, a demonstration or need any service assistance. We will be very happy to help you.